bookmark_borderIs It Okay to Use Car Wash On a Boat?

Boats spend most of their time if not all being in the water. So, it’s quite reasonable to ask this question, shouldn’t the outer layer be able to clean itself?

This is a question that wandered through our minds too. And this might have been possible at one point in time. However, in our day and age and with the state our shores are now in, this has become far from the truth.

Fishes and other ocean creatures aren’t the only lives man is negatively impacting. Man is also endangering its creations; high levels of pollutants present in the water are damaging ship hulls. The toxins are slowly eating their way through the ship’s skin.

Impact

The pollutants are not the only things that will be stuck on your boat. Other naturally occurring elements such a moss, mollusks, barnacles and other sea living creatures will find their way onto your hull. Moreover, this may also lead to the development of mold.

These elements stuck onto your hull will not only degrade your boat’s life but also cause the boat to lose its speed. As the externalities are dragged around in the water, they may cling on to other pollutants and form a chain, further lowering speed and agility.

These impacts may be a minor inconvenience in the short run; however, in the long run, you might not have a boat to feel difficulty about. If regular maintenance is maintained, you’ll save yourself from spending hundreds of dollars on boat repairs.

Solution

There are two solutions to this situation: one is to cut down on our carbon footprint and lower the pollutant we’re throwing into the water. This provides a long-term solution; regardless it is tough to achieve.

On the contrary, you could apply a solution that’ll help you in the short-term, i.e., to clean your boat regularly. To make sure that the toxic pollutants do not eat out or damage the hull of your boat.

How Often Should You Wash Your Boat?

Washing your boat might seem like a chore. However, it’s one that is quite necessary. Your boat isn’t like any other form of transportation you might own. Having to stay in the water at all times, means the boat is in constant contact with pollutants.

To prevent these pollutants from compromising the exterior of your boat, it’s recommended that you wash your boat after each use. A day’s use is enough to collect enough pollutants and oils that can damage seriously damage the hull.

Like your car collects dust when left unused, your boat functions in a similar way. Except for the slight difference that it’s collecting moss, slime, and other oils underneath. We recommend that you clean your boat before every use, given that it’s been kept untouched for quite some time.

Alternative Solutions for Boat Cleaning Compounds

Boat cleaners are broken down into various markets, with different products for different boats. Since each boat is different and based on different materials, you might find yourself hauling out premium prices and buying products by the basket.

Contrary to what companies would have, you believe this isn’t completely necessary. Most of the cleaning agents that are specifically designed for boats have similar if not the same, chemical compounds as other cleaners in the market. So, paying extra for specialized compounds is completely unnecessary.

This also answers the question we started the article with since a lot of components match those of car cleaning compounds. Thus, they make an excellent alternative for boat cleaning agents.

Car Cleaners That Should Be Compatible

Most car cleaning compounds will be an effective addition to your boats cleaning list. Not only are they cheaper in comparison, but they are also a rational choice. People with boats are likely to have cars, so you effectively have to buy fewer products.

However, it’s not necessary that everything you’ll be using in your car, you’ll be needing on your boat. There’s a decent selection of products you’ll be needing such as:

Car Wash Soap & Shampoo

Car soap and shampoo is a widespread term heard in the car community. Its primary purpose is to take away those tough patches of dirt and grime from your vehicle. And in this case, from the outer surface of your boat.

The compound completes this process quite quickly and effectively, as the soapy foam spreads around quite easily. It covers the boat’s outer surface in no just a few minutes. Once applied, all you need is to hose it off, showing a spotless coat.

The reasonably neutral PH value of the compound allows you to use it on gentler material such as wood or fiber, without damaging the outer layer of your boat. A gentler solution also means you’re able to keep the paint from splitting open, which would have revealed the boat to mold and other corrosive elements?

These solutions are quite normally available in large sizes, thus being able to cover both your boat and your car on a single buy. On top of that, you’ll be mixing this solution with water so you can expect a gallon of soapy water will go on for a long time.

Car Wax

This shouldn’t come as a surprise to those of you who are familiar with car wax. Car wax creates an artificial layer on top of the surface of your vehicle. This allows the surface to become repellent to water stains; with an extra layer, you’ll be able to say goodbye to dust and grime settlement.

It’s important that you get your boat waxed periodically, car wax, in this case, should do the trick. The wax not only helps make the surface of the boat water repellent. It also makes it difficult for moss, slimes, and oils to find to make their homes on the boat.

Saltwater can prove to be an extremely degrading potion for the coating of paint on your boat. The extra layer of wax protects your paint and gives it that glossy new finish.

Degreasers

This is a product that isn’t necessarily based on cars; however, it goes hand in hand with anything that involves oil, grime, and dirt build-up. On deck, this will work on almost anything, including removing stains created by bird poop.

A handy tool for extremely quick cleaning, one spray is good enough to get rid of extremely tough stains. That, too, without damaging the surface of the material. However, you must keep it away from wax jobs, as the solution will quite easily strip the coating off.

Car Wash Vs. Boat Wash Compounds

Even though both do the same job, and have very similar chemical compositions. They both have a slight level of variation that must be considered, while you make your purchase decision.

Strength

Car washing compounds are mainly made to deal with simpler forms of pollutants. Dirt, grime, tar they’re fairly simpler to remove, and can be done so with ease. However, things are not the same for boats.

As they form layers after layers of moss, mollusks, oils, slime, and other naturally occurring substances, removing these layers becomes very difficult.

Even more so, when you’re using car washing compounds, the compound will be able to loosen these pollutants.

But, removing them is the bigger challenge, you’ll have to put in quite some strength in scrubbing these out. This won’t be the case if you use the more abrasive compounds present in boat wash.

Environmental Factors

All these cleaning equipment and chemicals, they pose a fairly significant threat when it comes to being released in the environment. Car wash manufacturers may not consider the environment into account, as they suppose the cleaning agents go into the sewage system, where the water is cleaned out.

If you end up releasing such components into the water, you might find yourself causing some devastating impacts to the wildlife in that region. The spike of phosphorus in the water will fluster the chemical balance of the water, killing both plants and animals.

Boat cleaning agents, on the other hand, are made out of biodegradable elements. This is something that is strictly looked into by regulatory bodies, making them safer to use.  

A simple solution to this would be to use car washing agents with legitimate certifications of being environment-friendly. These may cost a bit more than your regular cleaners; however, keeping wildlife alive is our responsibility. It’s something that must be considered seriously.

Hull Cleaning

Most of the cleaners mentioned above will work quite easily on the outer surface of the boat and its deck. The main problem arises when it comes to cleaning underwater. The hull is not only one of the most important aspects of your boats, but it is also one that attracts the highest level of pollutants.

These pollutants are extremely stiff and wearisome to remove. Added with the fact that they form underneath the surface of the boat, where normal car washing solutions might fail to work.

In such cases, we’d recommend purchasing hull cleaning solutions; these provide an acidic PH value that causes the slime to cut right off. This one investment in which you’ll never go wrong.

Keep in Mind:

Another pointer to keep in mind is what you’re using to clean your boat with. This includes various forms of scrubs such as microfiber scrubs, high-speed jet washers, steel wools, sponges, and brooms. All these play a crucial role in cleaning your boat.

Choosing these must be determined carefully, keeping in mind the material of your boat’s body. As these pose different levels of abrasiveness, using something extremely rough on a soft surface may cause irreparable damages.

Conclusion

As more and more corporate official tries to entrap their customers into purchasing overpriced products. It becomes our responsibility, as the customer, to do our research before making a purchase. This is so that you can make a well-informed decision about how you wish to spend your hard-earned money.

bookmark_borderWhere Can I Get A 150$ Wood Lathe That Can Turn Bowls?

If you’re a beginner just starting in the wood making industry, or you have a small task to complete, and you aren’t willing to throw a big chunk of cash on a new wood lathe, then you’re at the right place!

For you to spend more than $200 on a machine, whose job is to spin wooden pieces and keep them in place seems silly! That too if you’re a beginner who’s just trying out a new hobby, and might lose interest in it quite easily.

Keeping all this in mind, let’s help you get an in-depth understanding of how a cheap or even 2nd hand wood lathe can do the same job as an expensive one.

What Does Wood Lathe Do?

Before we move forward, let’s understand what a wood lathe does. In simple words, a wood lathe can somewhat be compared to a Bench Vice. With the additional ability to rotate your workpiece along a particular axis. Even though this doesn’t perform much of a task, its presence is mandatory when you’re considering doing some work on your pieces.

This includes tasks such as cutting, sanding, knurling, drilling, deformation, facing, and turning. All these are completely essential when it comes to designing or creating art, that requires each side to be symmetrical and precise. These are more famous among artists, producing some tremendously creative and aesthetic work.

On A Budget?

Even though it’s a small task they do, it’s quite necessary to have them around. That is if you are determined to have a quality finish. However, the problem is a good lathe might throw you over budget!

Here’s the dilemma summed up; you need an excellent lathe that gets your job done, but at a price that they don’t sell them at! This might turn out to be a problem, however as the saying goes ‘if you’re determined enough, you can get anything done.’ The same can be applied here.

How To Select A Good Cheap Wood Lathe?

Since you’re buying a lathe at such a low price, you must have a physical look at the product before you’re buying it. To make sure that you’re not getting ripped off, you might want to consider these factors mentioned below:

Identify The Parts

It’s essential to make sure all the necessary equipment is in place; you don’t want to drive home and find that you’re missing parts. You might not be getting the fancy add-ons that are present in branded machines. However, the necessary ones should be there.

The wood lathe comes in a few key parts, first, come to the headstock. This is where the motor lies; you must check the headstock for other essential items such as the spindle and lock.

Second, you’ll find the tool rest, which should include a locking mechanism, with the bed. And third the tailstock, which must consist of the poppet barrel, barrel lock, and handwheel.

All this must rest on a well-lubricated bed to make adjusting according to the length of the workpiece simpler, and all must come together on the wood lathe stand.

Weight Of The Wood Lathe

The heavier a component, the harder it is to move; this is the simple mindset that you must follow. For a woodworker, and even more so for a beginner, even the gentlest of vibrations could ruin your outcome.

Make sure the set up you are buying cannot be easily lifted, a lightweight set up will be the cause for high vibrations. This will cause your work to turn out uneven. Throwing off the entire reason for having a wood lathe.

If you’re able to try choosing from a selection that is forged using cast iron rather than fabricated ones, this will give you that sturdiness and make the entire operation go out as smoothly as possible. However, this may raise the price, so we ask you to use your best judgment here.

Bench Mounted or Floor Mounted

If you want to save out a few bucks, this is your chance. Considering the line of work you’re trying to do if its just a small job that you are willing to do from home. Then you can skip out on the floor stand, and opt for a bench mount that can be attached using clamps.

This will not only save money but also will save you the hassle of clearing out space in your garage. However, you must keep in mind that the table you are attaching the device too should be sturdy and of the right size.

The Headstock

You might have to compromise in a few areas considering you’re on a budget. But this is the one place where a compromise would not be recommended. The headstock is the key element of the contraption, harboring the motor and spindle.

 Make sure the headstock that you’re buying is a solid build that is cast. And also, make sure the bearings inside spin freely when you turn it. Any form of hesitation here might mean cheap quality bearing; these won’t be able to take many loads. A good spread between the bearings will allow for greater rigidity.

Spindle

If you’re using accessories with your spindle, you may want to check their thread size. This usually shouldn’t be a problem considering you’re using the industry standard i.e., 3/4in×16 TPI.

If the thread sizes do not match, you might have to consider buying a different spindle that matches the size since quite a large investment is taken up in chucks and other accessories.

Amount of Swing

Lathes may have headstocks that are completely fixed in place; these end up being a problem for bowl turning. Since your main focus is to turn bowls, we’d recommend against a fixed headstock. For smaller bowls, this might be okay; however, for bigger ones, it’s a complete necessity.

With only a few degrees of swing from the center, it’ll make working on your bowls much more convenient. By swinging the bowl, you’ll be allowed to get all the corners with your tools, allowing you to do a smooth and even job.

Motor and Controls

These are where a compromise might become necessary. When you’re on a budget, you might not be able to expect a high-powered motor or controls that include all the bells and whistles.

Rather what you should look for is a decent motor; if you’re into just turning bowls, then a 1/3hp motor should do the trick. If you can get a bigger motor, at the same price, then that’s a win.

Before you buy the product, we recommend that you give it a spin. To check for how much it heats up, also, you might want to try it out with a load on as well. To see if it can handle the regular load you’ll be working with.

Given you’re on a budget, you might miss out on the varying speed controller and other fancy gizmos. What you might want to look for is solid wiring on the on/off switch and tactile buttons.

Tailstock

As important as the rest, the tailstock is where the other end of your workpiece will rest. There are two boxes to tick on this. First, a check should be made on its ability to move freely on the bed. This will make sure, making adjustments isn’t a problem.

Second, the handwheel must allow you to turn the barrel freely. Going both inwards and outwards. This will give you the freedom to do drilling work easily and also stay precise.

Where Will You Get a Lathe That Fits Your Budget?

Prices on Amazon for a fairly decent lathe will start from around $250. Unless they’re running a huge discount if you’re lucky enough, you mightn’t be able to catch those. However, check this article on woodenuknow.

The places you should be looking out for are:

Craigslist

You’ll have to spend some time over here looking for the best, and it might also not match your needs on the first try. However, the best deals usually come quickly.

You’ll have to spend a little time going meeting one seller after another to find your best fit. However, this will save you from spending $500, keeping more to invest elsewhere.

Garage Sales

A large number of people who arrange garage sales they end up selling off tools that take up space in their garages and aren’t used frequently. With some luck, you might find the deal that matches your needs.

A large number of times, these garage sales include very old wood lathes. These lathes might look old; however, they are made to withstand the worse of circumstances. Usually forged with high grade cast iron and steel, these carry the quality-driven workmanship that we’ve lost with passing the time.

These are heavy-duty equipment; they may not include the same high-tech devices as we find in newer models. But, it will last for many more years to come, delivering the same power and efficiency. Skipping out on such deals would be a waste and a lost opportunity.

Woodworking Shops

As the economy booms, people keep updating their equipment to deal with greater demands. This means they sell off their old equipment, checking up with your local stores you might find someone willing to sell a 2nd hand lathe at a low price. 

These woodworkers use much more heavy-duty equipment, so if you’re lucky, you might get a fully functioning wood lathe inside your budget.

DIY

If all else fails and increasing your budget isn’t possible in any way. Then, you could consider making your lathe. These are pretty simple to build, with a large number of “how-to” YouTube videos available. Making one would take the extra time, but would stay inside your budget and even boost your morale.

Final Words

A Wood lathe is a great tool to show your creativity on. However, price hikes act as a barricade. We hope that this article provides you the required information to break that barrier. Keeping the few pointers we provided, you should be able to buy a lathe that’ll last you for a few years.

Back to home page>>>

bookmark_borderShould I Get a Speedboat or a Pontoon Boat?

Overflowing with different options, the boating industry seems to have made it difficult for consumers to make choices. With the differences becoming slimmer and slimmer, it’s harder to differentiate between any two categories.

Choices are excellent as they give consumers a variety to look into; however, as the saying goes, ‘too much of anything is bad.’ 

A large percentage of private boat owners buy their boats, keeping relaxation as a critical factor in their list. Along with other things, however, when you’re considering relaxation at an affordable price, both speed boats and pontoon boats come on top of the list.

Even though you might be buying this keeping similar interests in mind, both categories will have their own set of differences. Impacting your experience with the boats in a highly distinguishable way before we look into the differences, it’s essential for us to understand both categories.

Speed Boats

With a category that seems to have no end, it gets complicated to compare them with other product lines. Thus, we’re going to break it down to what’s most relevant i.e., Deck Boats.

Image Credit – boatingbuddy.com

Deck boats are the more consumer-based, day to day use type of speed boats available in the market. They’re a fun way of getting about on your weekends; riding these, you’ll have to have that adventure-seeking personality to be able to get the most out of it.

Their layout is similar to that of most traditional boats, with a regular hull that provides that streamlined ability for a quicker commute. If you’re a water sports enthusiast, then there’s no looking further. With the added benefit of being quite spacey, these all in one type of boats will keep you stunned.

Speed

Coming down from the speed boat line, you’ll expect Deck boats to live up to that name. Which they gracefully do, with a streamlined body structure, the boats can whizz through the water quite blissfully.

Since they’re meant for family and friends to have fun on, they keep a balance of both power and comfort. And if you’re all into breaking the balance, you could always go for a larger engine, or even two. Giving you a burst of power that can take you upwards of 120mph.

Size

Most speed boats aren’t famous for their sizes, with very little space available for you to walk around. This can make you feel a bit claustrophobic. However, deck boats aren’t like most speed boats. As we mentioned, these boats commit to giving you that perfect balance.

With a large size, your passengers will have enough space to stretch their legs and move about from time to time. They might not be able to mingle about as often as possible. But yes, more than most cramp packed speed boats.

They have vessels that measure on average at 6-7 meters, but they can quite easily stretch out over 8 meters. This will mainly be based on the money you’ll be pouring down and on the number of guests you plan to take with.

Water Sports

The biggest reason to purchase a deck boat lies here. With excellent engine power and an easy mounting position for water sports equipment. You’ll have that adventurous and thrill-seeking lifestyle you craved.

With a wide array of water sports equipment available in the market, such as wakeboarding, tubing, waterskiing and even parasailing, there’s no end to the amount of fun and thrill that awaits, for both you and your boating buddy.

Except for watersports, other fun activities such as fishing can be very conveniently done. You can even buy deck boats with the added fishing packages that include few amenities that are necessary while fishing.

Type of Water

Based on the idea of relaxation, thrill, and entertainment. Deck boats are made to be driven in weather conditions that match these ideas. When you’re traveling with your family and friends, you’d want a boat that lets you talk, mingle, and even get up and party.

Deck boats will be a great addition to your lake facing villas and are great for calm streams. A great to spend a relaxing day in the calm waters, without having to worry about people going overboard due to large waves.

You might want to consider choosing deep waters; due to the shape of the hull, the boat might find itself in trouble. Hitting the bedrock of the river, leaving your boat with permanent damages.

Brands to Be Considered

If you’re new to this, it’s only reasonable that you have a minimal idea about the ins and outs of owning a boat. If you find yourself stuck with a manufacturer that doesn’t provide much support. You’ll find resenting owning a boat, to prevent that we’re here to set you in the right direction.

BAYLINER

A massive name in the boating industry; this company, based in various states in America, has been making quality boating vessels since 1986. With a dedicated product line for motorboats.

Boston Whaler

If you have a fat wallet, then we’re sure you wouldn’t want to miss out on a boat that gives relaxation a new meaning. A company that makes the most luxurious models. Giving you the freedom to make a boat that fits your needs.

CHAPARRAL

When it comes to design, these people tend to set a benchmark that can’t be hit by most. With their sleek designs and bold colors, it’s difficult to miss their vessels. Another proof of beautiful American craftsmanship at work, paired with prominent quality standards.

PRINCECRAFT

This one’s for the learners, those that are just stepping their feet into this hobby. Quality beginner boats are designed to take up the users’ accidents. Boasting durability at an affordable price.

REGAL

Boats that are made to drive outperformance, with hulls streamlined to lower drag to the least of levels. They don’t make boats to just take you from A to B. Rather boats that’ll leave your hair flying back, and you thrilled.

Pontoon Boat

These, in general, are large boats that feature a flat deck shape that is mounted on top of two or more metal tubes called pontoons. The metal tubes allow the boat to maintain buoyancy; this paired with its design allows for larger decks.

They involve a minimal layout, which helps make them light and convenient. With greater floor space, you’re able to host larger events or trips with your boating buddy. Before you make your decision, it important to consider an array of factors that make pontoon boats a good choice.

Power

Pontoons a few years back were quite lacking in this region. Where they were unable to incorporate large engines due to their designs. Interfering in the boat’s ability to having a streamlined body structure.

However, with recent innovations in the boating industry and the use of new materials. Companies are now able to put on larger sized engines providing as much as 900 horsepower.

High power guzzling models can now travel up to speeds of 60mph. This puts the vehicle in speed boat territories. They are now built with larger tubes that make the pontoon more dynamic in the water.

Luxury

Since these boats are mainly targeting consumers that have relaxation in mind. Pontoon manufacturers now make them according to the needs of high-end consumers.

With interior packages that give you the scope of customization. You’ll feel like you’re buying a Rolls Royce. From the fabrics being used, the woodwork that is included, the type of wheel, and even the floor covering. All these will be factored on your ability to spend.

Electronics

What’s a good party without music? With parties being one of the main reasons to buy them, it’s important companies include a good stereo speaker. Once you’re in the market, you’ll find an array of manufacturers who are willing to hook you up with the best speaker system that fits your requirements.

Except for a good electrical system, you don’t need a large number of electronic gizmos. Considering these boats are mainly based on freshwater scenarios.

However, if you’re a tech-savvy individual, many companies allow you to add on high tech navigation systems, chart plotters, integrated control panels, and much more.

Fishing

With a large section of the consumer segment planning to spend their weekends in a quiet setting, as they fish peacefully at the lake. It’s expected of manufacturers to make sure that consumers can fish ever so effortlessly. The pontoons interior is designed accordingly, with a few designated seats designed especially for fishing.

You’ll also be able to get an entire fishing package; this should include compartments for your fishing equipment. Refrigeration systems to keep your fish from getting spoilt, and other smaller things such as pole rest. All in all, this should provide an ideal solution for your fishing needs.

Brands You Should Look out for

With such a vast ocean of pontoon boat manufacturers to choose from, it becomes difficult to find the best ones. Since these boats can be counted as an expensive investment, the right one must be made. Here’s a list of a few brands that we believe will be worth your money.

CRESTLINER

A boat manufacturer who has been producing high quality, durable vehicles for over 70 years. Seventy years of experience packed with a great price and a large variety to choose from.

LOWE Boats

That classic American craftsmanship paired with their highly affordable prices and a combination of durability and safety. This included their ability to meet every consumer’s needs, makes for a solid investment.

Regency

This is for high ballers, for those who’d prefer a luxurious weekend away from their busy schedules. High tech and extremely comfortable pontoons that’ll put a hole in your wallets but a worthy one at that.

RANGER Boats

With a 50-year-old heritage of delivering that top-grade American expertise. You can expect great things from their boats in terms of quality and performance.

LUND

For the fishing enthusiast in you, this one should be a catch. With boats specifically crafted for fishing, with the added benefits of durability and affordability. It’s a catch. We recommend not letting go.

Factors to Consider Before You Make Your Decision

Both boats give you an overall great experience in their ways. However, while making your decision, it’s important that you are completely aware of each product line’s abilities, and where each lack. This has led us to mention a few factors that should be considered before you make a choice.

Space

The idea of buying these categories of boats is so that you and your friends or family can spend time together. However, it’s also important for people to be able to move around mingle with each other.

Pontoon boats seem to win this round, with a flat shape. The pontoon boats allow for more space for people to move around. Not only do you get greater seating capacity. The seats are positioned to face one another. So, talking or mingling isn’t something you need to consider.

On the other hand, deck boats give you a comfortable amount of space. But that isn’t much compared to pontoons. If you’re considering throwing parties for a large number of guests, then going for pontoon boats would be a good idea.

The Thrill

With a generation full of thrill-seekers and adventure hogs, it’s only natural that boats must become faster. If you’re one of them, then we’d highly recommend that you consider a Deck Boat.

Given their big engines and their streamlined bodies, getting from point A to B wouldn’t have been this fun before. The higher power means a larger range of thrill-seeking activities can be fulfilled. So, if you ever get bored of one, you can always just leap to the next.

Pontoon boats, in this case, have to step down. Even with their high-powered engines, they don’t compare to the deck boats. Rather their shape allows them to be one of the safest boats to be manufactured. Making these much more convenient and suitable for family fun, where mainly small kids and aged people are involved.

So, this one’s going to be dependent not only on your own personality but also on the type of people you’re planning to host.

Handling

Once you’re out there in the midst of the water, separated from most of civilization. It won’t be easy for you to get help, even if the coast guard is present, he’ll still take a good amount of time to get to. In such cases, having a boat with good handling and navigability is essential.

Pontoon boats give handling a new definition; with the flat shape of the hull, even a novice could drive it without a hitch. It’s meant to keep things as simple as possible, so you rather than driving and can keep your focus on relaxing. The boat also sits on a high tube; this allows the boats to swoop into shallow waters easily. The navigability of this vessel couldn’t get any simpler.

Deck boats have a different case; they’re super fun to drive, given the shape of the hull. And can make some excellent turns at high speeds, due to their hulls design. However, this must be left to those with some experience at handling boats.

Therefore, this factor is a representation of the amount of skill you possess. If you’re a complete beginner, then the pontoon should do you good. However, with a few years of experience, you’ll find deck boats to be much more fun.

Comfort & Excitement

As the owner/ the captain of your boat, you must ensure that your guests remain entertained and comfortable at all times. Both these boats considering factors such as their design, engine, and much more provide fairly different experiences. It all comes down to who you’re inviting into your vessel.

A pontoon in its way is great for having a calm and soothing day after a hectic week. Added to the luxurious interior of the boat, you can host some very sophisticated gatherings.

 This a boat that caters better to a crowd who enjoys socializing rather than being strapped in a safety harness and being tugged along in the water.

The deck boat is a livelier situation, mainly for those adrenaline rushing teens. Those who prefer being on their feet, feeling the bumps of the water than sitting in one place and just talking. Those who couldn’t care less for comfort, and rather are more occupied trying to perfect wakeboarding tricks.

This is the point that differentiates the two boats and should give you that clear view of what you were looking to get from a boat.

Conclusion

Knowing the boat, your drive is necessary, as this is what sets limits on what can and cannot be done. Thus, clearing out the difference between each. Hopefully, this article will help you make the right judgment call. Where you get to choose the boat that fits you perfectly.

Related Resources:

Can You Build A Full-Size Boat Out Of Balsa Wood?

How Does One Build A Large Ship From Wood?

Where Can I Get A 150$ Wood Lathe That Can Turn Bowls?

bookmark_borderCan You Build A Full-Size Boat Out Of Balsa Wood?

The show a wooden boat puts out is nothing, compared to boats made nowadays, that use high tech materials, like plastic fiber, aluminum, etc. With the added factor that wooden boats are lighter than regular boats, and that the greater variety of wood available means you can vary how your boat feels according to your needs.

These factors give you the ability to customize your boating experience completely. However, it can be overwhelming when you go choose the material for your boat. With this vast ocean of materials available, finding the right one might prove difficult.

What Type Of Wood Is Usually Used?

When making a boat, there are a few names in the industry that are highly recognized. These woods are used quite frequently, each with its pros and cons. We’ll mention a few here to help you compare.

Ash

A commonly found type of wood that is almost used everywhere. It is a species that is native to eastern and central North America. From the hardwood family, the ash tree provides material that is very difficult to rot and can be bent easily.

Moreover, its great strength to weight ratio allows for a solid build. Thus, making it an excellent choice for boat building.

Yellow Cedar

A name that we’re all quite familiar with. This belongs to the cypress family; they are very commonly found on the coasts of northwestern North American. They are a common name in the construction industry.

Their wide known name is due to them being the toughest in the Cedar category with a very high tolerance to rot and decay. And also has an extremely nice shine when varnished. Thus, they are the secret to some show-stopping show-stopping boats that you’ll find in the harbor.

Chestnut

Coming down from the deciduous species, this is another name very common to the ears. You can find its origin in various parts of the world, making it great for cutting down costs in transportation.

These carry a course structure and a spiraled grain. However, they are straightforward to cut and bend, making them very effective to work with.

Cypress

The 2nd time we’re mentioning this name, with the various coniferous variations. These trees are mostly grown in the northern temperate conditions. These trees provide wood that is the key structural component in many contraptions.

The wood secretes its oils. This adds to the strength of the wood. It is also a very stable and safe choice. Thus the wood won’t break apart, making it a great choice considering you don’t want your boat filling up with water.

Fir

Its flexibility is what makes it famous in the boating the industry as it makes planking such an easy task. Another species of the coniferous trees are commonly found in the north and central American region, Europe and Asia.

The fir provides a significant rot free element in its wood; this saves it from all the pollution found in the rivers and other water bodies. Also, it’s easy to work with attitude makes it a favorite within carpenters.

Can You Make Boats Using Balsa?

The names we just mentioned above are a few of the top names in the boat building industry. However, they all lack something that our next candidate tops out in, that is, weight.

This wood usually is not used in the boat building industry, but if used, it could provide very large changes. Thus, providing the answer to your question i.e., Yes, Balsa wood, would make a great substitute in the boat building process.

What Is Balsa Wood?

A worldwide recognized name, Balsa wood is quite grandly known in the wood industry. Scientifically known as ‘Ochroma pyramidale,’ it’s commonly found in the tropical climate conditions. Making it fairly easily available in the market, with trees that grow more than 30m in height, thus delivering some hefty pieces of timber.

·  Weight

 What makes Balsa wood to stand out is its lightweight. The lightness of the wood gives it a lower density than other materials. Allowing your boat to make relatively better time than other boats made of heavier material. So, if you’re interested in a boat that can increase your speed, then this material should be on top of your list.

· Pricing

Being available in the tropical climates allows you to find the product widely available. Proving advantageous as you get a great deal at an affordable price. Making them convenient for large boats.

· Workability

It might get a little difficult to work with; due to the extremely low density, the surface might get a bit fuzzy. This might make it difficult to hold nails. However, since most planks on the hull are glued together, this shouldn’t be a problem.

Moreover, you won’t have to apply for a large number of coats. The woods stain pretty easily, so a few coats should do.

· Strength

 You might expect the wood to break easily, due to its lightness. However, that’s far from the truth. Balsa wood is a part of the hardwood community. So, it can provide great resistance to the roughness of the waters, and also be resistant to moderate bumps.

· Rot Resistance

Since the wood is part of the sapwood family, it is quite prone to insect attacks. This may be seen as a con, but a good rub with some pesticide solvent and some wax. Will give you layers of protection, keeping you away from rot and wood dampening.

Balsa Wood Uses

All these factors make Balsa wood a great choice when you’re considering building small wooden boats. However, this wouldn’t be the first time Balsa wood is being used in water-based transportation.

The wood is currently used commonly to make Buoys, Rafts, Surfboards Fishing Lures. All these are an indication of Balsa wood being a great choice when it comes to making boats.

Conclusion

Nothings perfect, if you consider those materials that are commonly used to make boats, they aren’t either. It’s in our hands to keep adjusting to things, and if we can’t, we try to fix its problems. That is what is needed when it comes to Balsa. Even with its flaws, we’re confident it’ll make great boats.

Related Resources:

Should I Get a Speedboat or a Pontoon Boat?

Build A Large Ship From Wood

Get A 150$ Wood Lathe That Can Turn Bowls

bookmark_borderHow Does One Build A Large Ship From Wood?

Wooden ships have gone down a long road in history, with the first ones built by the Egyptians, dating back to 2500BC. From then to now, ships have come ahead in an unfathomable manner.

Large wooden ships might not be conventional these days; however, surprisingly, there is still a niche demand present. With the art of wooden shipbuilding dying out, we must educate the coming generations. To ensure the passing of the torch, to help fill this small niche for the years to come.

Why Use Wood?

The start of building a good ship is the material you’ll be putting into it. Being in the 21st century with high tech equipment and a mixture of material, it might seem there is no place for ‘good old wood.’

However, that’s pretty far off from the truth. Wood to date delivers exceptionally well. A large part of developing countries, depending on their fishing industry, is a key to their lively hood.

Wood is not only cheaper but also provides a lower weight per unit volume. Making wooden ships lighter than ships made of other materials such as steel. Carrying more weight than vessels of a similar size wooden ships prove to be an economical solution.

Process of Ship Making

Shipbuilding isn’t as complicated as people make it out to be. However, you will require careful planning, precise measurement, and the right tools to make sure the job is done right.

The process of shipbuilding goes on a step by step basis. These steps have been carefully described below to help you get an exact apprehension of the process.

Designing

One of the most crucial elements, but one that must be extremely flexible to incorporate changes. The design is what forms the base of the entire production process. Its recommended that you get the plan approved from a master carpenter. To make sure all the dots are connected and ensure you aren’t falling short anywhere.

You must make sure to keep the budget in mind to not go completely overboard. The design should be made not as a whole rather part by part. This will help you focus on each segment of the ship, giving the carpenters a detailed look to make sure there are no discrepancies.

The design must be drawn up precisely, with the plans put up in exact required measurements. If you’re using feet or inches that must be mentioned as well, this ensures the carpenters working on the project are in sync — cutting off chances of wastage that make the project more expensive than it needs to be.

Inventory

The plans you made on paper were just plans; you must be prepared at all times for things to go wrong. This can be considered step 2, make sure you have your inventory, complete with the material you’ll need for each step. And some extra material in hand just in case something goes wrong.

Being prepared for any situation may be related to safety, or the ship will put you at an advantage. It’ll save time and further make sure you stay on schedule, another way you’re saving money.

Keel

Like any structure starting from the skeleton is the way to go. Emphasizing most of your resources here is essential. To make sure that everything remains sturdy and secure while facing the wrath of the sea.

The ship’s framework is wholly based on the keel of the ship. Also known as its spine. Thus it must comprise a large piece of lumber. Usually, a 12″ ×12″ piece would do the trick.

However, according to the size of your ship, you might increase or decrease the size. Make sure that you bolt on the stem piece as well along the length of the keel to support the upper deck. This stem also provides the base of the bow of the ship.

Frames

The framework of the hull must be based on a variety of wooden pieces, mainly two sets of timber pieces, straight and curved. This forms the basic rib-like structures of the hull. You’ll start to see the structure of a ship, start taking shape.

Once the ribs are formed, its time to set the flooring for the ship. This should be done using the best timber available. Considering this is the part of the ship that will remain underwater.

The carpenters must make sure that the flooring is watertight by preparing their edges by caulking (sealing tight edges with oakum and coating them with hot tar).

All the frames must be carefully shaped and smoothened, and unrequired ends cut off. This will makes covering the frames a simpler process. To further strengthen the base of the ship, another keel may be added on top of the keel. You must position it on top of the frames that have already formed the floor of the ship.

Planking and Caulking

 The floors being set its now time for the sides of the vessel to be built. This entire process is known as planking. Using long, heavy, and durable planks, the sides of the hull are covered up. The timber on the sides will encounter bumps and hits from waves. These need to be placed sturdily to withstand that force. 

Once the sides are done, the carpenter must cover-up the inner layer; this is another form of planking known as the ceiling. Contrary to its name, the ceiling is the placement of planks to form a cargo hold. This and the added benefit of extra strength makes it a necessary layer.

Once the planks are put in place, they must be made watertight. This again, must be done using caulking. That is, you must seal off the edges of the planks by driving yarn or fibers into the slits and then covering the entire floor with hot tar to completely make the planks waterproof and resistant to rot.

Engine And Rudder

The main powerhouse of the boat needs to be installed before you completely seal up the upper portion of the boat. This is where your engineers and mechanics come in, to help you install the engine and rudder onto your boat. Make sure the controls are carefully and securely installed.

Since we’re dealing with a large amount of fuel, the fuel tank must also be securely placed in the lower deck. Taking all the necessary precautions that are mentioned by the engineers in charge.

Finishing

Once the engine is installed and checked, the deck must be covered up. Using the support from the frames and the stern, the deck must be planked. Over here, the wood being used doesn’t necessarily have to be thick and hard. This one will depend on the purpose you’ll be using the ship for. If it’s to transport heavy material, a fairly sturdy wood should do the trick.

Once the decks finished, ship joiners can start working on the internals of the ship. This includes the houses/ cabins for crew members and guests, the control rooms, the kitchen and washrooms, the hatches that take you below deck, and much more according to your requirements.

A proper coat of paint would only do the ship better, as a coat of paint will make the ship further water-resistant, would also make the wood catch fewer rots. Moreover, a coat of paint on the metal joints would save you from corrosion.

Mast

If the engine doesn’t do you enough and you want your ship to have that classic look, then the mast will be the way to go. Masts usually come in large poles that are produced using timber.

The stems that we included in the previous points were mainly to support the weight of the mast. Using large cranes, these mast bars must be loaded on top of the deck. Here they need to be parallelly matched with the stem bases in the lower deck.

Riggers must keep a careful watch on ques; as soon as the mast reaches its desired position, the riggers need to use the lines attached to help keep it in place. These lines need to be secured to the sides of the ship. The lines used must come out of the factory waterproof, rot-proof, and able to keep up in the worst of conditions.

Launching

As common sense dictates, it always helps to build ships closer to the shore. So, at the time of launching, transportation costs can be minimized. Ships must be built on top of beams that help support the vessel during construction; this is also known as blocks.

Before launching the floor of the slope through which it’s supposed to slide down must be greased up. Next, carpenters must design a cradle-like structure; this will hold the ship upright instead of the blocks. But this will also allow you to tip the ship sideways.

Using this method, the ship must be carefully and gently launched into the water. However, you must make sure to keep safety harnesses attached while the ship slides down, preventing it from tipping over.

Conclusion

In a world that keeps moving forward, we sometimes miss out on the beauty of things from the past. Regardless, we hope this article helps make an impact on future shipbuilders. Guiding them to help successfully build ships of sheer size, strength, and power.

Related Resources:

Build A Full-Size Boat Out Of Balsa Wood

Speedboat or a Pontoon Boat: Which boat I get?

Where Can I Get A 150$ Wood Lathe That Can Turn Bowls?